Technical Specifications
STANDAR
- FACE FRAME: Poplar wood
- SIDES: 12 mm Birch Playwood
- BACK & BOTTOM: 12 mm Birch Playwood
- DOOR: Shaker 5 pc poplar stiles & poplar rails with 1/4 MDF center panel
- DRAWER: Shaker 5 pc poplar with 12 mm center panel
- SHELF: 18 mm Birch Playwood
- TOE KICK: 12 mm Birch Playwood
- DECORATIVE MOULDINGS, FILLER AND SKINS: Poplar wood
- HINGES: 1 1/4 overlay 6 way soft close
- GLIDES: Full extension undermount soft close with rear bracket
- DRAWER BOX: Poplar wood with dove tail joint
BASIC
- FACE FRAME: Poplar wood
- SIDES: 5/8 Particle Board o MDF Melamine paper
- BACK & BOTTOM: 5/8 Particle Board o MDF Melamine paper
- DOOR: 7/8 MDF stiles & rails with 1/4 MDF flat panel
- DRAWER: Slab
- SHELF: 5/8 Particle Board o MDF Melamine paper
- TOE KICK: 5/8 Particle Board o MDF Melamine paper
- DECORATIVE MOULDINGS, FILLER AND SKINS: MDF 7/8
- HINGES: 1 1/4 Overlay 6 way normal close
- GLIDES: Full estension ball bearing
- DRAWER BOX: 12 mm Birch Playwood with staple joint
Assembly System
Our RTA assembly system makes it easy to assemble the cabinet in the workshop
With a corner brace joining the face frame to the side panel, and on the back it is with a groove and glue, reinforced with screws with the Kreg system on the back cover towards the sides.
